KEW 8115 - Clamp Sensors/Adaptor

Share:
Measuring range AC 0.1 - 130Arms (185Apeak) DC 0 - ±180A
Output voltage AC 10mV/A DC 10mV/A
Accuracy ±1.2%rdg±0.4mV (50/60Hz)
±2.5%rdg±0.4mV (40 - 1kHz)
±1.2%rdg±0.4mV (*)
Low battery warning 2.2V±0.2V or less - Red LED flash
(1.9V±0.2V - Automatically power off)
Conductor size Max. Ø12mm
Withstand voltage AC 3540V (RMS 50/60Hz) for 5 sec.
Operating temperature & humidity range -10 to 55ºC, relative humidity 85% or less (no condensation)
Output impedance Approx. 10? or less
Applicable standards IEC 61010-1 CAT III 300V Pollution degree 2,
IEC 61010-2-032, IEC 61326-1
Power source DC3V (size AAA alkaline battery LR03×2pcs)
* Continuous use: approx. 40 hours
(Auto power off: approx. 20 minutes)
Cord length Approx. 1,200mm
Output connector ?4mm banana plug
Dimensions 127(L)×42(W)×22(D) mm
Weight Approx. 140g
Accessories Soft case, LR03×2, Instruction manual

7066A
Test Leads

View Detail