KEW 8130 - Flexible Clamp Sensor

  • Can measure AC current up to 1000A
  • Flexible and light weight by the air core coil used at the sensor part
  • Designed to meet the international safety standard IEC 61010-1 CAT IV 300V, CAT III 600V
Conductor size max.Ø110mm
Rated current AC 1000A
Output voltage AC 500mV / 1000A (AC 0.5mV/A)
Accuracy ±0.8%rdg±0.2mV (45Hz - 65Hz)
±1.5%rdg±0.4mV (40Hz - 1kHz)
Phase shift within ±2.0° (45Hz - 65Hz)
Cable length Approx. 3m
Output connector MINI DIN 6PIN
Output impedance 100? or less
Applicable standards IEC 61010-1, IEC 61010-2-030,
IEC 61010-2-032 CAT IV 300V / CAT III 600V Pollution degree 2,
IEC 61326
Operating temperature & humidity range -10 - 50°C, relative humidity 85% or less (no condensation)
Weight Approx. 180g
Included Accessories Instruction manual, Cable marker,
9095 (Carrying case)

Test Leads

View Detail

A PHP Error was encountered

Severity: Core Warning

Message: Cannot load module 'memcached' because required module 'igbinary' is not loaded

Filename: Unknown

Line Number: 0