KEW 6516BT - Multi Function Tester

  • Color LCD 3.5 inches dot matrix.
  • Anti-Trip Technology (with 2 & 3 wire) for no trip LOOP L-PE testing on all RCDs.
  • With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines).
  • High test current range of 2? with 0.001? resolution.
  • Zs Limit compares the values required by Electrical Installations Standard with measured results.
  • Type AC, A, F, B(General & Selective), EV and Variable RCDs.
  • Single and Auto test, Ramp test and Contact voltage.
  • Earth resistance test 2 and 3 wires with all accessories included.
  • Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
  • Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
  • On 3-phase lines with clear indication of the sequence on the display.
  • TRMS Voltage measurements 2-600V, Mains Frequency.
  • Display shows how to connect the instrument according to the function selected.
  • Surge Protection Device test, for SPD that uses varistor.
  • Portable Appliance Tester function, for Insulation and Protective conductor resistance test Communication by "KEW CONNECT".
  • IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,7,10.
Share:
Insulation resistanceSPD(Varistor)
Test
voltage
100V 250V 500V 1000V Max.1000V
Measuring
ranges
2.000/20.00/200.0M?
(Auto-ranging)
20.00/200.0/1000M?
(Auto-ranging)
20.00/200.0/2000M?
(Auto-ranging)
0-1000V
(goes up by 1V)
Accuracy ±2%rdg±6dgt
(2.000/20.00M?)
±5%rdg±6dgt
(200.0M?)
±2%rdg±6dgt
(20.00/200.0M?)
±5%rdg±6dgt
(1000M?)
±2%rdg±6dgt
(20.00/200.0M?)
±5%rdg±6dgt
(2000M?)
±5%rdg±5dgt
Rated
current
1.0-1.2mA
@0.1M?
1.0-1.2mA
@0.25M?
1.0-1.2mA
@0.5M?
1.0-1.2mA
@1M?
?
Short circuit current 1.5mA max ?
Loop impedance
Function LOOP ATT LOOP HIGH
L-PE/L-N
(3wire)
L-PE(2wire) L-PE
(0.01?Res)
L-PE
(0.001?Res)
High test
current(25A)
L-N/L-L
Rated
voltage
100-260V
(50/60Hz)
48-260V
(50/60Hz)
48-260V
(50/60Hz)
100-260V
(50/60Hz)
48-500V
(50/60Hz)
Impedance
range
20.00/200.0/2000?
 (Auto-ranging)
20.00/200.0/
2000?  
(Auto-ranging)
2.000? 20.00?
Accuracy ±3%rdg±6dgt  ±3%rdg±10dgt ±3%rdg±4dgt ±3%rdg±25m? ±3%rdg±4dgt
Nominal   
test
current at
0? external
loop:
Magnitude/
Duration at 230V 
L-N:6A/60ms
N-PE:10mA
L-PE:15mA 20?:
  6A/20ms
200?:
  0.5A/20ms
2000?:
  15mA/500ms
25A/20ms 6A/20ms
PSC/PFC 
Range 

2000A/20kA 
(L-N(PSC)/
L-PE(PFC))

2000A/20kA 
(PFC)
2000A/20kA 
(PFC)
2000A/50kA 
(PFC)
2000A/20kA
(PSC)
Accuracy PSC/PFC accuracy is derived from measured loop impedance specification
and measured voltage specification
RCD
Rated voltage 100-260V(50/60Hz)
Function x1/2, x1,x5,Ramp,Auto,Uc
6/10/30/100/300/500/1000mA/variable
RCD type AC(G/S) A(G/S) F(G/S) B(G/S) EV
Trip
current
setting
x1/2,
x1,Uc
10/30/100/300/
500/1000mA(G)
10/30/100/
300/500(S)
10/30/100/
300/500mA
10/30/100/
300/500mA
10/30/100/
300mA
6mA(x1 only)
x5 10/30/100mA 10/30/100mA 10/30/100mA 10/30mA -
Ramp 10/30/100/
300/500mA
10/30/100/
300/500mA
10/30/100/
300/500mA
10/30/100/
300mA
6mA
Accuracy
Trip
current
x1/2 -8% - -2% -10% - 0% -10% - 0% -10% - 0% -
x1 +2% - +8% 0% - +10% 0% - +10% 0% - +10% 0% - +10%
x5 +2% - +8% 0% - +10% 0% - +10% 0% - +10% -
Ramp -4% - +4% -10% - +10% -10% - +10% -10% - +10% -10% - +10%
Trip
time
x1/2 2000ms(G/S):±1%rdg±2ms -
x1 550ms(G):±1%rdg±2ms,1000ms(S):±1%rdg±2ms 10.5s:±1%±2?
x5 410ms(G/S):±1%rdg±2ms -
Continuity
Range  20.00/200.0/2000? (Auto-ranging)
Open circuit voltage(DC) 7-14V
Measuring current 200mA >200mA or more(2? or less)
15mA 15mA±3mA(short-circuit)
Accuracy  ±2%rdg±8dgt
Volts
Range  300.0/600V(Auto-ranging)
Measuring ranges Volts 2-600V
Frequency 45-65Hz
Accuracy Volts ±2%rdg±4dgt
Frequency ±0.5%rdg±2dgt
Phase Rotation
Rated voltage 48-600V(50/60Hz)
Remarks Remarks Correct phase sequence: are displayed “1.2.3” and mark
Reversed phase sequence: are displayed “3.2.1” and mark
Earth
Range  20.00/200.0/2000?(Auto-ranging)
Accuracy ±2%rdg±0.08?(20.00?)
±2%rdg±3dgt(200.0/2000?)
Applicable standards IEC 61010-1 CAT IV 300V ,CAT III 600 V Pollution degree 2
IEC 61010-2-034
IEC 61557-1,2,3,4,5,6,7,10
IEC 60529(IP40)
IEC 61326(EMC)
Power source LR6 (AA) (1.5V) ×8
Communication interface USB, Bluetooth®5.0,Android™5.0 or more, iOS 10.0 or more ?1
Dimensions / Weight 136(L) × 235(W) × 114(D) mm / Approx. 1300g (including batteries)
Included Accessories Main test lead?2
7281(Test leads with remote control switch)
7246(Distribution board test lead)
7228A(Earth resistance test leads)
8041(Auxiliary earth spikes[2 spikes/1 set])
9084(Soft case)
9142(Carrying case)
9151(Shoulder strap)
9199(Shoulder pad)
LR6(AA) × 8, Instruction manual, Calibration certificate
Optional Accessories 8212-USB(USB adaptor with "KEW Report(Software)'')
8259(Adapter for measurement terminal)
7272(Precision measurement Cord set)
8017A(Extension prod long)

7066A
Test Leads

View Detail